Maxxeon 314 Leak Detection/ Inspection Light
The rugged WorkStar® 314 UV 395nm leak detection inspection light is compatible with all (395nm) fluorescent leak detection dyes and is designed for daily use by professionals in demanding shop, manufacturing and maintenance environments. The tough aluminum body is anodized violet and is virtually indestructible. All threaded joints have rubber O-ring seals so it is IP67, dust tight & waterproof to 3 ft. The rugged side switch is rated at 100,000 cycles and is sealed to avoid contamination by dirt and grit.
LED Brightness: (Radiant Flux)520 mW (1X Zoom), 360 mW (3X Zoom)
LED Wavelength, Power: UltraViolet (UVA) 395 nm nominal (390-400 nm), 1 W
Zoom Lens: Glass lens slides back and forth allowing you to focus the beam on your work area. The zoom adjusts from wide beam with no rings, shadows, or hot spots to handy narrow beam. The beam diameter to distance ratio ranges from 1:1 to 1:3, meaning at 2 ft from an object, the minimum zoom beam is about 2 ft wide and the maximum zoom beam is about 8 in wide. In other words, it has 3X zoom at maximum, relative to minimum.
Switch: Click ON/Click OFF, side mounted for convenient thumb operation
Included:
- WorkStar® 314
- 2 AAA alkaline batteries
- Run Time:
- Alkaline - 30 min continuous operation & 2 hr with typical intermittent use
- Aluminum Body & Head:
- Aluminum with Violet Type II Anodizing
- Length:
- 5 inches (13 cm)
- Diameter:
- 5/8 inches (16 mm) maximum
- Temperature:
- 15º to 105ºF (-10º to +40ºC)
- Ingress Protection:
- IP67 = dust tight & waterproof to 3 ft (1 m) - rubber O-ring seals
- Drop Test:
- 6 ft (2 m)
- Type:
- Penlight
