Maxxeon 5200 Jr. LED Work Light
The WorkStar® 5200 LUMENATOR® Jr is a rechargeable, industrial grade work light that is not only practical, but darn near perfect. The unique hexagon shape combined with the nylon handle allows this area light to be positioned on a variety of surfaces. The rubber bumper around the aluminum body/heatsink protects the edges and provides good surface grip. The nylon handle tilts 180 degrees and acts like a support leg or mounting point. The hole in the handle adds mounting flexibility for the optional accessories: the powerful Neodymium magnetic base, the single-head telescopic tripod and the triple-head telescopic tripod. It can also be used as a permanent or semi-permanent mounting point.
LED Brightness (Luminous Flux): High - 1250 lumens, Medium - 600 lumens, Low - 300 lumens
Power, Color: 10 W COB (chips on board), CRI > 80, Daylight White, 5700K
Heat sink: LED is mounted in a sealed aluminum heat sink assembly, which protects the LED from dirt and fluids
Power/Brightness Switch: Sealed power switch controls the 3 brightness levels: LOW-MEDIUM-HIGH-OFF...
Beam Ratio: The COB LEDs plus the unique glass lens creates an ultra wide floodlight beam - no rings, no shadows, no hot spots. The beam diameter to distance ratio is about 3:1, meaning for example, the beam diameter is about 6 ft wide when the light is 2 ft from an object.
Batteries Included: Li-ion 11.1 volt, 2.2 Ah battery pack. Pack is user replaceable
Run Time: High - 2 hours, Medium - 5 hours, Low - 9 hours
Recharge Time: 3 hours
Regulator Circuit: High efficiency constant current circuit to maximize brightness and runtime
Battery Life & Charge Indicator: Three green LEDs are arranged in a bar graph format to indicate both the battery life and the charge level
Wall Power Supply/Charger: Input - 100-220 VAC, 50/60 Hz UL-Approved North American power supply with standard "Type A", two prong plug. Output - 15 VDC, 1 A. Use only the supplied the MXN10133 Power Supply. The LUMENATOR®Jr is not compatible with the original LUMENATOR® MXN10080 Li-ion Charger.
Body: Aluminum with rubber edge protector
Handle: The sturdy nylon handle rotates 180° to adjust the light angle and it is the mounting point for optional tripod stand and magnetic base
Dimensions: 7 x 6.5 x 2 inches (18 x 17 x 5 cm)
Weight: 1.5 lb (0.7 kg)
Temperature: 15º - 105ºF (-10º - +40ºC)
Ingress Protection: IP65 = dust tight + waterproof to water jets and rain
Impact Test: IK07 = 2 J
Drop Test: 6 ft (2 m)
Includes: WorkStar® 5200, a user replaceable 11.1 VDC, 2.2 Ah Li-ion battery pack and a 100-240 VAC, 50/60 Hz, 15 VDC, 1 A UL-approved power supply
Lead Time Information