Maxxeon WorkStar 812 HiVis Green, Cyclops USB LED Work Light

(No reviews yet) Write a Review
$34.94 $27.97
(You save $6.97)
SKU: MXN00811
Technical Specifications
  • Maxxeon WorkStar 812 HiVis Green, Cyclops USB LED Work Light
On Sale

 Maxxeon 811 Cyclops LED Work Light

The rugged WorkStar® 811 commercial grade professional LED work light is designed for daily use by technicians in demanding shop, manufacturing and maintenance environments. The tough ABS body, polycarbonate lens and nylon handle are virtually indestructible. The rugged power switch is rated at 50,000 cycles and is sealed to avoid contamination by dirt and grit. It's a great cordless inspection light for HVAC and auto techs, as well as other trades like plumbers and electricians.

LED Brightness (Luminous Flux): High - 420 lumens, Low - 160 lumens

LED, Color, Power: Custom Array, Daylight White, 3.8 W

Beam Ratio: 9 LEDs arranged in a square patten + a custom designed lens creates a round floodlight beam - no rings, no shadows, no hot spots. The beam diameter to distance ratio is about 2:1, meaning for example, the beam diameter is about 4 ft wide when the light is 2 ft from an object. The ANSI FL-1 beam throw is 108 ft (33 m).

Power/Brightness Switch: Sealed power switch cycles through Low-High-Off...

Battery Included: 3.7V 1800mAh LiPo (Li-ion Polymer) rechargeable battery; USB recharging cord included

Run Time: High - 2 hours, Low - 5 hours

Recharge Time: 3 hours

Battery Life and Charge Indicator: 4 green LEDs work in 25% increments to show the battery level while in use and while charging

Charging Input: Micro USB

Body Material: ABS plastic

Magnetic Base: Built into the base of the handle is a powerful magnet with a protective covering. The magnetic strength of the WorkStar® 810 was increased relative to the WorkStar® 800.

Tripod Socket: Built into the base of the handle is a standard camera 1/4"-20 tripod socket, which is the mounting point for the optional octopus tripod stand and the optional suction cup

Handle: The handle rotates 360 degrees with 12 indented positions. It can be used as a handle, a stand, or the built in magnet can be fastened to ferrous metal surfaces so the light can be aimed. It is also the mounting point for the optional octopus tripod stand and the optional suction cup.

Length: 3 1/2 inches (9 cm), with handle 4 1/4 (11 cm)

Width: 2 3/8 inches (6 cm), with handle 3 (7.5 cm)

Thickness: 1 inch (2.5 cm)

Weight: 7 ounces (200 grams)

Temperature: 15º - 105ºF (-10º - +40ºC)

Ingress Protection: IP64 = water resistant, i.e., protection from rain, sprays and splashing of water in all directions. But not waterproof, do not immerse in liquids.

Drop Test: 6 ft (2 m)

Included: WorkStar® 810, 18 inch (45 cm) USB charging cord


Lead Time Information