Gedore 2916371 Locking Toolkit, PSA (1.4 - 2.2 HDI), Width 395mm - GD KL-1380-26 KC
For locking/positioning the camshaft, crankshaft, injection pump shaft and flywheel. The kit also contains tools for adjusting the timing belt tensioner and for holding the belt in position. An indispensable tool set when replacing a timing belt or performing an engine repair. Required when changing the timing belt or repairing the engine.
Features:
- Suitable for Citroen, Peugeot, Lancia, Ford, Volvo, Fiat 1.4, 1.6, 2.0 and 2.2 HDI diesel engines
- For locking the camshaft, crankshaft, injection pump shaft and the flywheel
- For adjusting the toothed belt tensioning unit
- For holding the toothed belt
- Suitable for PSA Citroen, Peugeot, Lancia, Ford, Volvo and Fiat 1.4, 1.6, 2.0 and 2.2 HDI diesel engines, e.g. Peugeot Boxer II, Expert I/II, Expert III, Partner/Partner Origin/Ranch I/II, RCZ, Boxer II, 206+, Bipper, Partner III, Expert III, Partner III, Partner/Partner Origin/Ranch I/II, 107, 206, 206 CC, 207, 207 CC, 307, 307 CC, 308, 308 CC, 406, 406 Coupe, 407, 508, 607, 807, 1007, 3008, 4007, 5008, Citroen Berlingo III, Berlingo/Berlingo First I/II, C1, C2, C3 I/II/First/Classic, C3 III, C3 Picasso, C3 Pluriel, C4, C4 II, C4 Picasso/Grand Picasso, C5, C5 II, C5 III, C6, C8, C-Crosser, Dispatch/Jumpy III, DS3, DS4, Nemo, Relay/Jumper II, Xsara II, Xsara Picasso, Fiat Ducato, Scudo, Ulysse, Lancia Phedra, Ford Scudo, C-MAX, Fiesta, Focus, Focus C-MAX, Fusion, Grand C-MAX, Mondeo, Mazda 2, 3, 5 and Volvo C30, S40, S60, S80, V50, V70
Specifications:
- Suitability: PSA, Citroen, Peugeot, Ford, Volvo, Fiat, Mazda
- Depth: 295mm
- Height: 106mm
- Motor Type: Diesel
- Weight: 4.85 lbs
- Width: 395mm
- Country of Origin: Germany
Scope of Delivery:
1 x KL-1380-2215 A - Locking mandrel angled, 1 x KL-1380-2216 A - Locking mandrel angled, 1 x KL-1380-2219 A - Locking mandrel with a diameter of 7.9mm, 1 x KL-1380-2220 A - Locking mandrel with a diameter of 7.9mm, 1 x KL-1380-2228 A - Locking pin tensioning pulley, 1 x KL-1380-231 A - Blocking tool flywheel, 1 x KL-1380-233 A - Locking mandrel with a diameter of 7.7mm, angled, 1 x KL-1380-234 A - Puller for crankshaft, 1 x KL-1380-237 A - Toothed belt holding clamp, 1 x KL-1380-2601 A - Locking tool crankshaft, 1 x KL-1380-2602 A - Locking tool crankshaft with a diameter of 2mm, 1 x KL-1380-2603 - Locking mandrel with a diameter of 4mm, angled, 1 x KL-1382-1 - Toothed belt wrench, 1 x KL-1382-2 - Toothed belt socket spanner, 1 x KL-0680-2201 A - Locking mandrel with a diameter of 11mm, 2 x KL-0680-2202 A - Locking mandrel with a diameter of 4.5mm, 1 x KL-0680-2203 B - Locking mandrel with a diameter of 8mm, 1 x KL-1380-2690 A - Plastic case
