Gedore 3123707 Suspension Ball Joint Sleeve Toolkit, Renault / Dacia - GD KL-1210-221
For the quick, safe and professional removal and installation of the suspension ball joint found at front axle wishbones. For this, the hydraulic cylinder KL-0040-2500, press frame KL-0039-1140, adaptor KL-0039-1002 and pressure spindle KL-0039-1930 are needed in addition. Removal and installation of the suspension ball joint can be carried out in situ on the vehicle, within a few minutes, without the need for dismantling the wishbone. Note: Alternatively, the KL-1210-221 sleeve set can also be used on an appropriate workshop press. Removal and installation of the suspension ball joint can be carried out in situ on the vehicle, within a few minutes, without the need for dismantling the wishbone. Note: Alternatively, the KL-1210-221 sleeve set can also be used on an appropriate workshop press.
Features:
- Suitable for Renault and Dacia on the suspension joint of the front axle whishbone
- For a simple removal and installation of the suspension joint directly on the vehicle
- Unnecessary to remove the corresponding wishbone
- Additional drive parts required
- Can be alternatively used on a stand press
- Installed in, e.g. Renault Clio Grandtour, Clio III, Clio IV, Grand Scenic II, Megane II, Modus / Grand Modus, Scenic II, Twizy, Zoe, Dacia Logan, Logan Express, Logan MCV, Logan Pick-up, Sandero, Sandero II
- Alternatively, the KL-1210-221 sleeve set can also be used in conjunction with an appropriate workshop press
Specifications:
- Suitability: Renault, Dacia
- Drive Type: Hydraulic, Mechanical
- Weight: 3.53 lbs
- Country of Origin: Germany
Scope of Delivery:
1 x KL-0711-1111 - Pressure sleeve short 38mm dia., 1 x KL-0039-1754 - Support sleeve long 54 / 46mm dia., 1 x KL-0039-1746 - Pressure sleeve long 46 / 38mm dia., 1 x KL-0039-1654 - Support sleeve short 54 / 46mm dia.
- Type:
- Sleeve Toolkit
- Drive Type:
- Hydraulic, Mechanical
- Suitability:
- Renault, Dacia