Gedore 3292762 Wheel Hub Puller Set, Ford, 97.5mm, 111mm - GD KL-0174-372
This supplementary kit enables quick and professional removal of the bolted wheel bearing unit with wheel hub and brake disc on the front axle, as well as subsequent removal and insertion of the wheel hub on the wheel bearing unit, especially for closed wheel bearings without center bore. Required, for example, when replacing the wheel bearing and brake disc, as these are located behind the wheel hub. All work can be carried out directly on the vehicle within a few minutes. Time-consuming removal and installation of the wheel bearing housing and subsequent wheel alignment are not necessary.
Features:
- Fits with the front axle on Ford Transit/Tourneo (as of YOM 2014) with rear drive and a hole circle diameter at the brake discs of 97.5 mm and 111 mm
- For professionally pulling the screwed wheel bearing unit with the wheel hub and the brake disc
- For pulling and pressing in of the wheel hub on the wheel bearing unit
- Required when the wheel bearing or the brake discs are being replaced
- No removal and installation of the wheel bearing housing required
- Also for vehicles without center bore
- Fits with the front axle on Ford Transit/Tourneo (as of YOM 2014) with rear-wheel drive and a hole circle diameter at the brake disc fixing screws of 97.5 mm and 111 mm
- Particularly suitable for vehicles with wheel bearing units without center bore in closed design on the front axle
Specifications:
- Suitability: Ford
- Drive Type: Hydraulic
- Weight: 6.39 lbs
- Wheel Stud Circles: 97.5mm, 111mm
- Country of Origin: Germany
Scope of Delivery:
1 x KL-0040-8501 A - Thrust ring, 1 x KL-0040-8621 - Thrust adaptor, 5 x KL-0039-1823-4 - Cylinder screw M10 x 12, 5 x KL-0186-9000-3 - Cylinder screw M10 x 75
- Type:
- Puller Set
- Drive Type:
- Hydraulic
- Suitability:
- Ford
- Output Size:
- 97.5, 111mm
