Gedore 3423468 Workshop Trolley, Bearings and Bushings - GD KL-4999-260

The assembly trolley "MODULO 260" with its unique composition is the ideal, mobile workstation for fast, organized, and efficient repairs. Included in the modulo: Various drive parts such as hydraulic cylinder 17t KL-0040-2500, ring ratchet/open-end spanners, impact extractors 4.8 kg - KL-0049-31 as well as pull/thrust spindles (mechanical, hydraulic), quick-clamping nuts and adaptors of the KL-0039.series for driving the tool kits, Articulated handle KL-4007-411 as well as power spanner/socket spanner sockets (SK / TX / XZN) for loosening and tightening of wheel bearing central screws, Locking ring pliers KL-0192-5 for the disassembly and assembly of wheel bearing locking rings, Wire brush for de-rusting and cleaning various components, Wheel hub puller KL-0041-38. as well as wheel bearing tool kits of the KL-0041-4. Series for pressing out and in of wheel hubs and wheel bearing units, for example on VW, Audi, Seat, Skoda and Ford, Mazda, Volvo, Pullers of the KL-0174. Series for pulling standard wheel bearings as well as pressing out bonded and stuck cardan shafts, Hook for impact extractors KL-0049-360 A for pulling of wishbones from the suspension joint clamping hole, Wheel bearing tool kits of the KL-0039. series for pressing out and in of nearly all standard wheel bearings and wheel hubs, Silent block tool kits of the KL-0039. series for pressing out and in of silent blocks and joints bearings, Pressing devices of the KL-0326-1. series for pressing out and in support/guide joints; for example, on Mercedes and VW T4, Pressing devices of the KL-0610-1. series for pressing out and in silent blocks on rear axle trailing arms; for example, on Ford, Mazda, Volvo, Wheel bearing tool KL-2211-111. for pulling stuck screwed wheel bearing units; for example, on Subaru. Further information on the assembly trolley: Dimensions: H 985 x W 1200 x D 635 mm, Beech multiplex worktop, 30 mm thick, oiled, Total load carrying capacity: 1000 kg / mobile operation: 750 kg, 2 fixed castors Diameter 200 mm and 2 swivel castors Diameter 125 mm with total brake, Sheet steel, corrosion-resistant, scratch-resistant powder-coated in GEDORE blue, Wide drawers (W 998 x D 474 mm) with full extension, max. load 70 kg, Automatic drawer retraction with single pull-out stop and central locking system, Side walls with Euro perforation 10 x 38 mm for attaching hooks and tools.

Features:

Universally applicable for repairs on wheel bearings, steering and axle systems on passenger cars and vans
The ideal, mobile workstation for quick and organized maintenance work
Content / range of application - Various drive parts for driving the tool kits
Forcing out and pressing in wheel hub / bearing units
Pulling of wishbones from the support joint clamping hole
Forcing out and pressing in wheel bearings and wheel hubs
Forcing off glued and stuck cardan shafts
Forcing out and pressing in suspension and guide joints, silent blocks and joint bearings
Pulling off stuck screwed wheel bearing units
Including helpful hand tools