Knight Global Safety Drop Stop "SDS" Twin Chain Dual Motor Servo Hoist, 700 -4000 lbs Capacity
Knight's Twin Chain Servo Hoist and Dual Motor Twin Chain Servo Hoist are Intelligent Assist Devices (IAD) that enable an operator to precisely locate or float a load in the "Z" direction (vertical axis) with speed and reliability. This design specifically helps to control and balance unwieldy or long parts. Both Twin Chain Servo Hoists are equipped with the "SDS" (Safety Drop Stop) feature. Twin chains are mechanically linked together so they operate as one unit. Twin chains are controlled in conjunction with each other. Each motor is electronically synced together with an option of a (LMM) Load Monitoring Module with Operator Controlled Interface or a (LMM) Load Monitoring Module with Pass Through Interface. The Twin Chain Servo Hoist allows for many application solutions due to the various programmability features. They enable an operator to simply grasp the handle and move the load, eliminating push buttons. Traditional hoists require the operator to push buttons in order to initiate a natural ergonomic motion. Knight's Servo Hoist technology becomes an extension of an operator's natural movements and greatly improves accuracy, responsiveness and repeatability, which increases overall safety, productivity and quality. The inherent benefits include, eliminating wasted motions, reduced reaction times, and minimal effects of inertia with heavy loads.
General Information:
| Model Number | Capacity lbs. [kg] | Max Speed [fpm/mpm] | Voltage / Phase |
|---|---|---|---|
| KSHTCDM700S-4803 | 700 lbs. [317kg] | xx.xx fpm. [mpm] | 480 / 3 Phase |
| KSHTCDM1500S-4803 | 1500 lbs. [680kg] | 123.03 fpm. [37.5mpm] | 480 / 3 Phase |
| KSHTCDM2000S-4803 | 2000 lbs. [907kg] | 41.01 fpm. [12.5mpm] | 480 / 3 Phase |
| KSHTCDM4000S-4803 | 4000 lbs. [1814kg] | xxx.xx fpm. [mpm] | 480 / 3 Phase |
Mechanical:
- Speeds: Up to 196 ft. per min. [60mpm]
- KSHTCDM - Dual Motor Control
- Standard Chain Center Point Distances: 24 in. [609mm] - 36 in. [914mm] (Widths over 36 in. are custom)
- Safety rating of 125%
- Fail safe brake
- Knight's patented chains, for longer life
- Chain length, unlimited (18 ft. Standard)
- Sealed worm style gearbox
- H5 Rated (Continuous Duty Cycle)
Electrical:
- Industry Standard 24 VDC, 2 AMP power is available for custom tooling such as: Clamps, Vacuum Cups, Switches, Proximity Limits, Lights, etc.
- Illuminated run/stop button
- 240 VAC, Single phase 50/60 Hz
- Load sensing, pay load and handle load
- I/O Capabilities:
- (16) Inputs / (8) Outputs
- (8) Inputs / (4) Outputs are free for interface controls
- LED status indicators, green and blue lighted push buttons
- LED fault indicators, illuminated run / stop button, twist to release
- Optional remote pendant or remote handle
Software:
- Programming and diagnostic communication ports
- Virtual travel limits
- Speed reduction zones
- Impact limiting
- Active dampening
- Standard float mode
- Programmable overload capability
Digital Assets:
- Type:
- Servo Hoist
- Capacity:
- 700 lbs
- Voltage / Phase:
- 480 / 3 Phase
