Knipex Crimping Pliers for Wire Ferrules - KN 97 62 145 A
For work on control systems, in IT, on domestic electrical and electronic systems
The 97 62 145 A von Knipex crimping pliers from Knipex are a solid and accurate tool that can be used wherever end sleeves (ferrules) with a trapezoidal profile are crimped. The trapezoidal-shaped crimped end sleeves are especially suitable in the terminal strips on control systems due to the usually high and slim supports. The Knipex crimping pliers are also used in motor electronics and on domestic electrical systems, e.g. during the installation of entertainment electronics or lighting elements. With the multi-component grips, they sit comfortably in the hand.
Custom-fit alignment of the crimp profile to the crimp volume
To achieve a crimp result in line with the standard, the crimp profile must be carefully matched to the material volume of the end sleeve (ferrule) plus wires. This means that here too it is essential to have the appropriate tool. Appropriate is also the key word when selecting the right crimp die. Four crimp dies of between 0.25 and 2.5 mm sq are available in total. The trapezoidal cross sections are clearly marked to ensure that the end sleeves (ferrules) are inserted correctly.
Accurate and reliable crimping
Manual force can be measured easily when crimping end sleeves (ferrules) with the 97 62 145 A crimping pliers. Once the correct crimp die has been selected, after crimping the end sleeve sits permanently and securely on the conductor.
Crimping pliers from Knipex: good quality for maximum durability
Crimping pliers for end sleeves (ferrules) from the Knipex range impress with their smooth-running and optimum transmission ratio. Crimping is easy. The Knipex crimping pliers are manufactured on modern machinery using vanadium electric steel, and are then oil-hardened. The safe use and great benefits of the tools are the results of decades of toolmaking experience, constant product development and the commitment by Knipex towards high quality standards.
Features:
- Forged crimping pliers for crimping end sleeves (ferrules) in accordance with DIN 46228 Parts 1 + 4 in the capacity range of from 0.25 to 2.5 mm sq
- Crimping in marked trapezoidal dies for reliable connections between the sleeve and the conductor
- Manufactured from vanadium electric steel, oil-hardened
- Polished pliers head
- Handles with multi-component grips
Specifications:
- AWG: 24 - 14
- Application: Wire Ferrules
- Capacity: 0.25 - 2.5mm sq
- Number of Crimp Profiles: 4
- Dimension: 145 x 55 x 19mm
- Handles: Multi-Component Grips
- Head: Polished
- Length: 145mm
- REACH Compliant: Does Not Contain SVHC
- RoHS Compliant: Not Applicable
- Weight: 0.37 lbs
