Sturtevant Richmont 1250 Series Exacta 2 Digital Torque Wrench
Specifications:
Part Number | 10657 |
---|---|
Model Designation | 1250 Series Exacta 2 - 600 |
Capacity | 600 ft lb |
Dovetail | 3/4" SD Ratchet |
Lever Length | 55.1"/1399 mm |
Over All Length | 59.7"/1519 mm |
Weight | 13.0 lb/5.90 kg |
1250 Series Exacta® 2 Digital Torque & Angle Wrench
- Bi-directional +/- 1% Indicated Value from 20% to 100% of tool capacity.
- Meets/Exceeds the ASME and ISO standards.
- Angle measurements include: Torque To Angle, Torque With Angle Monitoring, Residual Torque, Prevailing Torque Mode.
- Also operates in Peak Mode with no angle measurements.
- Included with the 1250 Series wrenches are two single cartridge batteries and charger. One battery can be charging while the other is in use.
- Vibrating handle when the target torque and angle values are reached.
- Programmable wrench display ''lighting sequence'' works with both torque and angle. Within the engineering specifications, a target can be set to acknowledge target achieved feedback with display color change and handle vibration.
- Up to four tools can operate simultaneously with the Global 400/400mp.
- Robust radio communication speeds support the shortest takt times.
- Operator can complete active P-Set even if radio communication is severed.
- When radio communication resumes, the wrench automatically uploads all missed P-Set data.
- The wrench automatically recalibrates for P-Sets requiring different head lengths.
- Wrenches are available with our traditional fixed ratchet, pin/spring dovetail, optional quick change (QC) dovetail with access to well over 200 interchangeable heads.
Compatible Products
- Fully compatible with Global 400 and Global 400mp controller where multiple tools with simultaneous uses are needed. The 1250 Series Exacta 2 does not communicate with the Global 8, PTV or TCV.
Why Torque and Angle?
- Torque with angle measurement provides a significantly more accurate and repeatable clamp load from one assembly to the next.
Traceability and Digital Data Capture
- Provides digital date/time stamped documentation on every fastening achieved with our wireless tools.
1250 Series Exacta® 2 Digital Torque & Angle Wrench Five Operational Modes:
Torque to Angle: T2A
- Measures torque first and then degrees of fastener rotation to stretch the fastener a predetermined amount. That closely managed bolt stretch creates greater repeatability than using torque alone.
Torque with Angle Monitoring: TAM
- Measures torque while ensuring sufficient rotation. Helps identify ''double-tightened'' fasteners and changing joint conditions.
Prevailing Torque Mode: PTM
- Factors out friction inherent to lock nuts.
Residual: RES
- Audit torque value on previously tightened fasteners with greater accuracy.
Peak
- Pure torque measurement without angle measurement.
****This tool requires a Global 400 controller****
- Type:
- Torque Wrench
- Capacity:
- 600 ft.lbs
- Lever Length:
- 1399mm
- Overall Length:
- 1519mm